5 Tips To Improve The Signal Of Your Best Long Range Wifi Antenna Network


Nowadays, it is difficult to imagine a home computer without access to the network via WiFi, since most people already prefer the use of Laptops for convenience and convenience. Another important factor is smartphones: those who use these devices know that 3G networks cannot be trusted all the time, and the first opportunity to jump into WiFi is always welcome. To know more about the wifi Antennas for Long Range Coverage you can refer Noflufftech. For buyers its important to know about the Long Range Wifi Antenna Review.

The problem is that sometimes this type of connection can present problems, either by interferences of other equipment, by the bad positioning of the router or even by the low quality of the device. Here are 10 good tips to solve all the problems you may have with WiFi.

  1. Keep your equipment up-to-date

As with all electronic equipment and technologies, WiFi is constantly evolving, so whenever you can, you should upgrade your devices to always ensure more speed and reliability in data transmission.

There are several IEEE 802.11 standards for currently wireless networks, such as A, B, G, N, and AC. While the B standard transfers data up to 11 Mbps in speed, the A and G standards can transmit information up to 54 Mbps. The N format can send and receive data at up to 600 Mbps, and the AC would reach 1 Gbps.

In order to achieve higher transmission speeds, you need to have a router that is capable of transmitting in the AC standard and a compatible NIC – but the most common ones are limited to the N standard. Older network adapters can be replaced easily; routers need to be replaced by newer models.

  1. Position your router in the best possible location

Even if your router does not match the décor of your living room, it is not advisable that you hide it behind some furniture. It is extremely important that it is positioned in a high place and completely free of obstacles. After all, it is a signal transmitter and needs space.

Ideally, you should leave the equipment in the most central location of your home, so you guarantee the best signal coverage possible in the far corners. Another important tip is to keep the appliance in a high place, such as on top of some shelf, or stuck to the same wall.

Something that many people do when they realize that the signal is weak is to position the router’s antennas toward where you are. This is completely wrong, after all, the router is not a TV antenna. Therefore, to ensure signal quality, always leave the unit’s antennas pointed upwards.

  1. Look for a transmission channel that is released

The routers transmit radio waves and, so the signal can travel without problems, it needs a communication channel that does not interfere with other devices. Since most people today have such equipment at home, it is normal that there are conflicts, especially if they use the same transmission channel.

How to find out which channel is most suitable to use? There is a very efficient Android device program called Wi-Fi Analyzer that can answer this question. Once you find out which channel is being used the most, reprogram your router and enjoy the much more stable network signal.

  1. Get Rid of Interference-Causing Equipment

In addition to other nearby routers, there are several other devices that can cause interference on your network. Cordless phones and microwave ovens are among the main responsible for this. It is worth remembering that even the construction of bathrooms can be an obstacle.

To avoid this problem, you can purchase telephone sets or routers with different frequencies. If installing new equipment is not an option, simply positioning them away from one another can solve the problems in most cases.

  1. Get rid of signal thieves and Increase the security of your network

Even if your router already has a registered password, it may be very simple and some opportunistic neighbour is stealing the signal from your network, slowing it down. The best way to prevent such things from happening is to choose a more advanced security standard, such as WPA.

The password must be difficult, always blending letters and numbers. Just like all security codes, you should change it often. To prevent others from identifying your network and trying to “guess” the password, avoid using names that tell you where the signal is, such as “So-and-so’s WiFi.”

A final, somewhat more radical, step is to limit the number of connections to your router by the MAC address of your network card. It works like this: the access to the equipment is completely blocked, except for the MAC code that you have released, in this case, your Laptop or smartphone, for example.

This is a good security measure, but it can be a nuisance to have to add the MAC of each of your friends who visits your home and needs to use your network.

Post Author: newtechposts

Leave a Reply

Your email address will not be published. Required fields are marked *